hot drawing
英 [hɒt ˈdrɔːɪŋ]
美 [hɑːt ˈdrɔːɪŋ]
热拉（拨）；热拔钢管（丝）法
双语例句
- After a few seconds I noticed a really hot girl drawing me. I got a hard on.
几秒钟以后我就注意到了一个非常火辣的女孩在画我&于是我硬了。 - It's a kind of phemonemon of anisotropic material to crack hot rolled drawing sheet.
热轧冲压板开裂现象是一种板材料力学性能各向异性的表现。 - It has the advantage in simple process, low cost and high quality compared with hot drawing.
工艺过程简单，加工成本低，零件质量高。 - In recent years, Chinese foreign exchange reserve has been growing rapidly all along, hot it is deficient in drawing a conclusion that Chinese foreign exchange reserve is overabundant only from the point of view of economics.
摘要近年来，我国外汇储备一直保持快速增长，但单纯从经济角度就得出我国外汇储备“过多”的结论有失偏颇。 - The experiment and numerical simulation of hot deep drawing forming properties of ME20M magnesium alloy sheet are researched in this paper.
对ME20M镁合金板料进行了热拉深成形性能实验与数值模拟。 - Effect of hot water drawing on structure and properties of polyacrylonitrile nascent filament
热水浴拉伸对聚丙烯腈初生纤维结构和性能的影响 - The progress of research on hot-rolled deep drawing steel sheet
热轧深冲薄钢板研究的进展 - The effects of the jet stretch ratio and draw ratios of three-stage drawing including air drawing, DMF bath drawing, hot water and boiling water drawing and dry-hot drawing on the properties of PAN fiber were studied in dry-jet wet spinning.
研究了干-喷湿纺聚丙烯腈（PAN）初生纤维的喷丝头拉伸比和三级拉伸（空气拉伸、DMF浴拉伸、热水和沸水拉伸、干热拉伸）工艺中各拉伸比对纤维性能的影响。 - Calculation of wall thickness of shells for hot expanded tubes produced with drawing process
拉拔式热扩径管管坯壁厚的计算 - With the method of adding nano-particles during extracting stage, dry UHMWPE gel fiber dispersed with nano-particles is prepared, after multi-step hot drawing, modified UHMWPE fibers are prepared.
采用萃取加入的方式制成了纳米粒子均匀分散的UHM认甲E干冻胶纤维，然后经过多级热拉伸，制成纳米粒子改性UHM从甲E纤维。 - The Influence of the Hot Drawing Technology to the Formability of Magnesium Alloy Product
热拉深工艺对镁合金制品成形性能的影响 - Breaking occurred in shell bottom in FE simulation of one step hot drawing forming cambered shell, which has been proved in test of forming.
采用有限元模拟曲面壳体一次热拉深成形，壳体底部出现断裂，成形试验也与模拟结果一致。 - Curved Surface Shell Hot Drawing and Finite Element Simulation
曲面壳体热拉深成形及有限元模拟 - Improvement on state monitoring technique for hot drawing machine of acrylic fiber
腈纶热牵伸机状态监测技术的改进 - Stress-strain curves of PAN fibers during drawing in hot water were investigated at different temperatures and drawing velocities.
主要考察了聚丙烯腈纤维在水浴牵伸过程中的应力-应变曲线，以及温度、牵伸速率、水分对应力-应变曲线的影响。 - To detect the response latency of hot injured drawing the legs and sensitive degree of non-injured mechanical irritation: At the 3rd day of putting tube, the response latency of drawing the legs and mechanical pain threshold were tested respectively as basic value.
测定热伤害性缩腿反应潜伏期及非伤害性机械刺激的敏感程度：置管后第3天分别测定缩腿反应潜伏期和机械性触痛痛阈作为基础值。 - Research for Increasing the Life of Hot Drawing Punch
提高热拔伸冲头寿命的研究 - During extracting process, UHMWPE gel fiber were treated with the solution of two modifiers, then the resulting modified fibers were further drawn via multi-step hot drawing.
在萃取阶段用表面改性剂溶液对超高相对分子质量聚乙烯（UHMWPE）冻胶纤维进行表面处理，然后经过多级热拉伸制得改性纤维。 - As an important component of government expenditure, public consumption expenditure, together with economic growth, has been one of the hot issues drawing attention and discussion from economists. People have various kinds of opinions and viewpoints.
公共消费支出作为政府支出的一个重要组成部分，其与经济增长之间的关系始终是经济学界关注和探讨的热点问题之一，可谓众说纷纭、观点不一。 - The surface defect of the wire rod is closely related with the defects of the billets ( such as longitudinal crack, subsurface blowhole and entrapped slag) as well as scratch taking place in the process of hot rolling and cold drawing.
线状缺陷与铸坯缺陷（如纵裂纹、皮下气泡、夹渣等）以及热轧和冷拉拔过程中产生的划伤有关。 - Forming limit is one of the hot questions in the drawing research field.
成形极限是拉深领域研究的热点问题之一。 - The transverse crackles of steel wire surface are due to the deeper lapping of surface ferric oxide or surface layer martensite for local over hot by bad lubricating in wire drawing;
钢丝表面横裂主要是轧钢过程中折叠的表面氧化铁皮较深，或拉拔过程中润滑不良造成局部过热，导致表层产生马氏体引起的； - Analysis and application of hot rolled deep drawing steel
热轧深冲钢板的分析和应用 - Theoretical Analysis of Hot Drawing Process of Hemispherical Heads
半球形封头热拉深成形理论分析 - ( 9) The proper hot deep drawing technologies were developed.
制定了合适的AZ31镁合金板材热拉深成形工艺。 - With the course of establishing harmonious society and legitimate society, research of forensic accounting becomes a hot topic drawing much attention from the accounting theoretic field in our country, but a relatively mature theoretical system has not been formed yet so far.
伴随我国建立和谐社会、法制社会的进程，对法务会计的研究成为我国会计理论界关注的热点问题，但至今仍未形成一套相对成熟的理论体系。 - Hot Drawing achieve the purpose.
达到温拉深成形的目的。 - This topic comes from project "Hot drawing roller speed and temperature control system research".
本课题来源于项目热牵伸辊转速与温度控制系统的研究。 - The relationship between ownership structure and corporate performance has always being a hot topic drawing both domestic and international academic attention.
股权结构与企业绩效之间的关系一直是国内外学术界关注和研究的热点话题。